Y Street system is suitable for midsize roads and gardens. Its appearance is useful for city areas, but it is also suitable for antique surrounds.
It is built in cast aluminium non corrosive, and its varied optics that can be adapted to light as per distribution needs.
Light source: High efficiency LED
Qty. of LEDs: 16, 32, 48 LEDs
Lenses efficiency: 94%
Color temperature: PC-AMBER / 2700K / 3000K / 4000K
Color rendering index: >70
Lifetime L70B10: 100.000 h Ta=25ºC 350 mA
85.000 h Ta=25ºC 700 mA
Operating temperature range: from -20ºC to 50ºC
Luminous flux: Up to 19042 lm
LED efficiency: Up to 163 lm/W depending on configuration
Luminaire efficiency: Up to 151 lm/W depens on configuration
Power supply: Constant current driver
Regulation: 1-10V, DALI, AC voltage dimmer, movement sensor, 5 steps dimming.
Optical: Different lensens combination for CE, ME and S class
Norm: EN60598-1 / IEC 55015
Electrical characteristics
Consum: LED: Configurable up to 100W
Mains voltage: 220-240V 50-60 Hz
Surge protection: 10/10kV
Isolation classification: Class I, Class II depends on configuration
Power factor: >=0,95
Materials: Base: cast aluminium EN AC 51100
Shaft: 5mm coned estruded aluminium
Height: 5000mm/4200mm
Base: Ø285x2000mm
Shaft: 2200mm
Anchorage: Flange plate with holes distance 250x250mm
4 anchor bolts M18x500mm
Opening door: Flush 350x140mm
Finishing: Cupper sand blasting. Optional, 2 components epoxy primer and polyurethane painting
Colour: Without paint. RAL or AKZO colors available under request
Norma: EN 40-5
Column characteristics L
Materials: Base: cast aluminium EN AC 51100
Shaft: 5mm coned estruded aluminium
Height: 6500mm/5200mm
Base: Ø345x2420mm
Shaft: 2800mm
Anchorage: Flange plate with holes distance 300x300mm
4 pernos M22x700mm
Opening door: Flush 400x200mm
Finishing: Cupper sand blasting. Optional, 2 components epoxy primer and polyurethane painting
Colour: Without paint. RAL or AKZO colors available under request
Norma: EN 40-5
